XPR-9S-DC

Small in scale, but not in awesomeness

Your dream of bringing a full-sized BendPak car hoist to your desktop, shop or shelf has finally arrived. Introducing the world’s first fully-functional BendPak XPR-9S two-post hoist in 1/10 scale size. Sharing similar mechanics found in all BendPak two-post hoists, the inner-workings of this scale-model masterpiece are truly exceptional. It’s a must-have tool and collectible for any auto-enthusiast, scale-garage fanatic, diorama devotee or those looking to add the perfect workshop companion to their growing radio controlled (RC) cars and trucks collection. If you don’t have a scale garage now, you most likely will after getting your hands on one of these.

This small-scale XPR-9S-DC features built-in miniature DC motors that raise and lower the hoist with the simple push of a button. Fully-adjustable telescoping hoist arms ensure your scale model vehicles sit proudly atop of the hoist ready to be admired by all. A NiMH rechargeable battery pack is also included to allow years of use and enjoyment.

No professional auto shop or home garage is complete without a BendPak hoist towering over the work area. Bring your scale models, RC cars and garage scenes to a whole new level with this miniature-sized XPR-9S two-post hoist, or dare we say, its little brother.

Precision billet aluminum construction

Not to bash those other toy model car hoists, but this masterfully constructed scale model is built like a Swiss watch - it’s a very big step ahead. ​Like the real thing, this precision-made car hoist goes up and down just like that BendPak hoist at your favorite mechanics workshop. It’s made heavy-duty and overbuilt just like a real BendPak. Would you really expect anything less? Made out of billet aluminum, it is structurally stronger than cast aluminum because it’s essentially carved from one solid piece. This process offers a higher degree of precision and structural integrity, ensuring quality and long-lasting enjoyment. Family heirloom anyone?

Direct-drive steel screws power the heavy, level hoisting

Most BendPak two-post hoists are powered by ​twin direct-drive cylinders, one in each column to drive the carriages and hoist vehicles. T​he small-scale XPR-9S-DC is designed with steel screws that span the full height of the model, providing more accuracy as the hoisting carriages move up and down.

And because there are two steel screws in each column, you’re guaranteed to have a precise even hoist and decent, keeping your vehicles level at all times.

Painted in BendPak’s official Gunmetal Gray

BendPak recently reinvented its color scheme of all hoist types to make them look sleeker and more modern in the garage. This small-scale XPR-9S-DC is electrostatically painted in BendPak’s Gunmetal Gray to the exact color code for authenticity and accuracy.

Outfitted with automatic shutoff micro-switches

Fixed to the top and bottom of both posts are tiny (seriously tiny) micro-switches that cut power to the miniature DC motors when activated. This prevents overworking the motor when the hoist is fully raised or lowered.

Telescoping hoist arms fit many different vehicles

With the same versatility and usability found in BendPak car hoists the world around, this XPR-9S-DC features integrated telescoping hoist arms perfectly suited for 1/8th and 1/10th scale vehicles. Telescoping arms swing outward and inward, while accurately constructed hoist pads precisely reach and accommodate the hoist points on virtually any scale model vehicle.

Convenient controls with integrated ON/OFF switch

Lift operators prefer a car hoist with simple controls so they can focus on hoisting safely and get to the task at hand. The XPR-9S-DC also features three convenient operator controls that are integrated flush into the back of the column for easy controlled hoisting. Features momentary UP and DOWN buttons combined with an ON/OFF power switch that isolates power to the motors and extends the rechargeable battery life.

Reaches full-rise height in 50 seconds

Integrated directly into each column are high-quality, permanent-magnet DC electric motors, capable of hoisting any 1/8th or 1/10th scale vehicle, weighing under 9.9-kgs., to full hoisting height in just 50 seconds or less.

Anti-tip base-frame keep die-cast upright at all times

Unlike full-scale car hoists that use concrete anchor bolts to secure them to your shop floor, the free-standing XPR-9S-DC features a full-width base-frame making it perfect for on-the-go fun. Impress your friends and family when you bring it and use it at your next car event or tradeshow.

Includes NiMH rechargeable battery pack

The XPR-9S-DC is powered by a 1400 mAh, 7.2 V NiMH rechargeable battery pack clandestinely hidden in the base of the model, eliminating unsightly wires and plugs. Use your standard RC JST battery pack charger that you use for your hobby cars to replenish the battery. (Requires a JST-PH 2.0 pigtail connector and charger. Not included with purchase).

Includes official BendPak-branded labels and warning decals

This officially licensed product made by RC4WD, global leaders in high-end scale automotive model products, was founded on quality, innovation and a love for all things automotive, which is why we adorned their first-ever 1/10 scale two-post hoist with official BendPak badging and livery. Each hoist is outfitted with exacting decals and warning labels officially used on real BendPak hoists to give that extra attention to detail that you’ve come to expect from RC4WD.

Purchase includes personalized gift message

Every purchase includes a personalized gift message cleverly placed inside the packaging. You customize the message and we’ll design the perfect greeting card and ship it with your order. Send it to the car lover in your life with a personal note. Add your personalized message at checkout. Just click the drop-down menu labeled "Gift options" and then add your sender, recipient and message.

RC truck is not included.