HD-9

Meet One of Our Most Popular and Versatile Hoists

A four-post hoist requires a serious level of engineering. To reduce strain on the columns and provide ample lifting security at all times, BendPak uses the most durable stainless steel lifting cables, as well as the single hydraulic cylinder, to provide an incredibly powerful and smooth hoist operation. With proper use, this car hoist will work as well on day 5,000 as it does on day one.

The HD-9 offers our largest variety in any BendPak four-post hoist weight class because most vehicles serviced by most shops weigh less than 4,082 kg. If you need to hoist heavier vehicles, we have larger-capacity models that keep you covered. For many of you, however, the HD-9 Series will hit the sweet spot for powerful hoisting, compact design and product value. Browse our 9K section to see all of what you can get on these models.

Dual-hub cable sheaves

Dual-hub cable sheaves are more expensive to manufacture, but it’s not a cost we push back onto you. They’re necessary to prevent axles, sheaves and cables from burning out before they should. Our philosophy is that your hoist should be the last thing you worry about first thing in the morning.

Multi-level locking positions

Unique service technicians require unique servicing positions; with the HD-9, you can safely lock your four-post hoist at varied heights, so you’re never crouching or reaching uncomfortably to perform auto maintenance. If you’re raising the hoist for parking purposes, that variation is going to come in handy, depending on how you stack your vehicles.

Heavy-duty aircraft cable

Each four-post hoist comes with four lifting cables made from superior-grade stainless steel. Each individual cable is rated to handle 6,531-kg. This makes their combined rating over 640% of the total capacity. These cables are hidden within the post columns for both the safety and overall streamlined look of the hoist. No one wants to see a cable dangling on the outside of a hoist. Tuck that thing away!

Electric-hydraulic power system

No need to worry about maintenance on your electric-hydraulic power systems! The controls are all within reach, so you can stop, start and reverse your four-post hoist on a dime.

Large base plates

254 mm x 305 mm base plates keep your car hoist rooted in place for as long as you own it. Make sure the ground is level and you’re good to go!

Caster kit

Ask us about the 4-piece caster kit that fits all our 9K four-post hoists. They turn your stationary hoist into a mobile parking and service station. You can even leave a car on top while you move it!

Integrated design

All lifting cables, airlines, safety latches and sheaves are routed internally throughout the car hoist. This is a crucial safety feature that also adds significantly to your hoist’s curb appeal! (That is, if you have it visible from the curb.)

Low-deck runways

We keep our four-post runways to a low 114 mm, so low-stance chassis can be comfortably driven onto the hoist.

Longer approach ramps

Not only are our runways low, we extend them farther than others in the industry. This better suits the lifting of sports cars and other low-standing vehicles.

Automatic safety locks

Every BendPak four-post hoist is designed with a safety-first mentality. To this end, four locks engage simultaneously as the hoist is raised, and a backup locking system catches cable slack in the unlikely event of cable failure.

*Not all BendPak hoist models meet the standards as prescribed by ANSI/ALI ALCTV-2011 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.